Followers

Sunday 29 December 2019

Last Card of The Year For The Rubber Buggy


Hi Everyone I am here for
The Rubber Buggy
 here with my last
Christmas Card for the year.
 I have again Teamed up Lawn Fawn Papers, Dies and a 
Stamping Bella Stamp. Yet again she isn't a Christmas Stamp
but it just depends on how you colour her up and use her.
So I have layered the LF Stitched Scalloped Die Cut using
 white and second largest stitched rectangle. I also cut out a
 long restangle to create a shaker with LF Remix papers
and some Sequins. In between the white die cuts I cut a red
layer with my paper cutter 3D' each layer.
I then coloured up Paisely stamped a sentiment, Fussy cut around
her and 3D' her on.

Copics
Skin - E0000, E0000, E00, E01, E04, E11
Hair - E70, E71, E74, E77
Skirt, Shoes, Bows - R32, R35, R37, RV11
Shirt - G02, G12, G16


.

Monday 23 December 2019

The Rubber Buggy - Merry Everthing


Hi Everyone I am here for
The Rubber Buggy
here with my second last
Christmas Card for the year.
So today I Teamed up Lawn Fawn Papers, Dies and a 
Stamping Bella Stamp. This isn't a Christmas Stamp
but she is so versatile, Perfect for a Birthday, New Years,
Major Birthday 21st, 30th, 40th etc. or a celebrating in general.
So I have layered the LF Die Cuts using just white card stock.
The top layer I used an embossing folder I had in my stash.
The Shaker I created separate and used the designer paper
for the back of it. and just taped it on the card.
The Lovely Opal I coloured with copics but she
could be very easily water coloured.
Copics
Skin - E0000, E0000, E00, E01, E04, E11, R20
Dress, Shoes - R32, R35, R37, RV11
Leaves, Bottle - G02, G19, YG67
Bottle Label - YR21, YR23

.

Saturday 21 December 2019

Bellarific Friday - Mice In Boots


and there are not many days until  Christmas now.
and our Theme this week is

Christmas

 and I used

Mice In Boots

They are so Very Very Cute.


Copics
Mice - E40, E41, E43, E44, R20, RV000
Boots - R32, R35, R37, R39
Boot Cuff - C0), C0, C01, C03
Boot Sole - C05, C07, C09



Products
Lawn Fawn - Outside in Scalloped Rectangles
LLLC's - Mandala Doily Die
UC - Stitched Scalloped Circle Die

Crafts 4 U Merry Christmas Background
PPP - Sequins

Don't forget to take a look
at what the rest of my team have to
inspire you with Here!

Plus don't forget the
Stamp of The Month
is
Winter Window
with 25% off.

 There is also the colouring challenge at
on FB where you can enter the new challenge
for the Month of
and the theme is
and you just might to win some Bella Bucks.
You also should pop on over to the Blog to see all my
 Teamies Amazing  Cards and projects there this week.
Enjoy your Weekend and Happy Crafting. 


Jennifer



Wednesday 18 December 2019

Uniquely Creative - Your So Cool


Here's my Second Card for the
  New December Release for

Uniquely Creative

thats out now
so take a look at whats in the New Kit


here

VIDEO

I created this Adorable Possum Card with him
soaking up the sun in a hammock. What a
nice thought this time of year!


You're So Cool

Card Size : 4 1/2 x 5 3/4

Colours Used :

Copic Markers

Possum, Tree Trunk – E40, E41, E43, E44
Ears, Paws – R20, R81, R83
Glasses, Palm Leaves – YG0000, YG01, YG17, YG23, G61
Hammock – YR12, YR16, YR68


Kit Products Used : Nesting Sun Die, Papers, Pearls, Copic Friendly Paper, Cardstock,

Add Ons : Lazy Days Stamps, Lazy Days Dies,

Extra Uniquely Creative :
Stitched 10 Window Frame, Round Branches Die, Cross Stitched Nested Ovals, Ocean Waves

Extras :

Trimmer, White, 3D Tape, Tape Runner

Monday 16 December 2019

Uniquely Creative - December kit Flamazing

Yippee the New December Release is up for
Pre-Order from

Uniquely Creative

So take a look at whats in the New Kit


here

VIDEO

This is my first of 6 cards I have to share with you
over the next couple of weeks.
Card Size : 4 ¼ x 6 1/8

Colours Used :

Copic Markers

Flammingo – RV000, RV00, RV02, RV23
Beaks – C05, C07, C09, YR000

Kit Products Used : Flamazing Stamps, Nesting Sun Die, Papers, Pearls, Copic Friendly Paper, Cardstock,

Extras :


Trimmer, White, 3D Tape, Tape Runner

Sunday 15 December 2019

La-La Land Crafts 18 Days Of Christmas - Day 14

Image may contain: text


Hi it's Jennifer here with a Twist and Pop Card I thought
I would give one a go and these Adorable Mice were just 
perfect for it. Something a bit different from my 
 usual Shaker Cards.

Here's the inside with these Cute Mice.


Products I used

Copics
Mice - E40, E41, E43, E44
Aqua - BG11, BG13, BG45, BG49
Yellow - Y08, Y15, YR12
Red - R32, R35, R37
Grey - C0, C01, C03

So I live in Australia where it is really hot for Christmas and of
all things we have a really big roast lunch with all the family comming
to our house. So usually 20 plus people. We have so much food it lasts 
for a week after so we have lots of friends around for the next few days to 
help eat it.  Santa comes and brings the Kids even the 26 year olds
 a present and thats the only present that you can unwrap until
we have had main course. We then unwrap presents all together
then eat sweets. There favorite thing of the day is my homemade 
Bon Bons as they are individually made for each person.
As you may have realized  I looooove Christmas. 
Hoping you all have a Lovely Christmas
with Family and Friends.

Lots Of Crafty Hugs
Jennifer


Saturday 14 December 2019

Bellarific Friday - Butterfly Girl Babette



and our Theme this week is

Vintage
(Any Stamp not from the New Release)

 and I used

Tiny Townie Butterfly Girl Babette

and one of the Gorgeous

Butterfly Sentiments

So I created a Shaker Card using Velumn.
I also Created her Beautiful Wings using Magenta Powders.
The Wings look as vibrant IRL as they do here.

Copics
Skin - E0000, E000, E00, E01, E04, E11
Dress - BG11, BG13, BG15, BG45, BG49, B05
Hair - E31, E33, E35, E37, E50


Products
Lawn Fawn - Outside in Scalloped Rectangles
LLLC's - Mandala Doily Die
UC - Stitched Scalloped Circle Die

SSS - Moonshine Sequins
PPP - Sequins

Copics
Curtains - RV00, RV63, RV55, RV66
Tree - YG01, YG17, YG23
Tree Trunk, Curtain Rods - E41, E43, E44
Buttons - BG02, BG05
Sky - B34, B37, B39

Don't forget to take a look
at what the rest of my team have to
inspire you with Here!

Plus don't forget the
Stamp of The Month
is
Winter Window
with 25% off.

 There is also the colouring challenge at
on FB where you can enter the new challenge
for the Month of
and the theme is
and you just might to win some Bella Bucks.
You also should pop on over to the Blog to see all my
 Teamies Amazing  Cards and projects there this week.
Enjoy your Weekend and Happy Crafting. 


Jennifer



Wednesday 11 December 2019

Dreaming Of A Beach Christmas


Hi I am here for
The Rubber Buggy
  with a Card I created using this really
Cool Stamp. The Sentiment does say I'm Dreaming Of A Beach Christmas
but I stamped it and cut it up and made it a different sentiment.
I have cut a card base in white card stock 14 x 28cm. I then layered Red
Cardstock and Lawn Fawn Paper.  I then created a shaker using the stitched squares
 and Lawn Fawn Papers and Seqins for a quick background.
 I layered each usung 3D Tape. I then coloured up the Image with

Copics
Skin - E0000, E000, E00, E01, E04, E11
Hair - E44
Scarf - BV00, BV02
Scarf 2, Bus Stripes - BG10, BG11, BG13
Bus - R14, R27, R29
Bumper Bars and Tyres - C00, C0, C01, C03, C05, C07, C09
Tree- YG00, YG01, YG17, YG23

bazzill card shoppe candy necklace

Lawn Fawn Ink Pad - Jet Black Premium Ink


I hope you all have a Great Crafting Week

Jennifer


Tuesday 10 December 2019

Uniquely Creative - Down Under


Uniquely Creative Products Used 
Aussie Christmas Mini  Kit – Aussie Christmas Stamp and Dies, Stencil, Cut-apart sheet.
Round Branch Window Die, Stitched 10 Window Frame, Cross Stitched Oval Dies, White Pen
Other Products Used

 White cardstock, 3D tape, tape runner, texture paste, glitter, Tumbled Glass Distress Ink, Broken China Distress Ink
 Colours Used
Copics – Emu's – C01, C03, C05, C07, B32, B34, B37
               Beaks – E31, E33, YR12, YR68, Y17
               Reindeer Ears – E42, E43, E47
 Instructions
  1. Die cut in Orange cardstock Stitched 10 Window Frame, white cardstock Round Branch Window die, navy blue 5 1/4 x 4 inches, white cardstock Stitched Large Oval, white cardstock using the 2 largest ovals together cut a frame and white card base 5 1/2 x 8 ½.
  1. On the largest white panel stencil with texture paste the stars and then while wet, sprinkle with clear glitter.
  1. Using 3D tape to layer them all up.

  1. Ink the oval using the distress inks and 3D tape the Oval Frame onto it. Colour and die cut your emus.

Monday 9 December 2019

Uniquely Creative - Merry Christmas


Card Size : 5 3/4'' x 4 1/4''
Uniquely Creative Products Used
Aussie Christmas Stamp Set, laser cut, stencil
Other Products Used
Trimmer, Copic friendly paper, texture paste, glitter, 3D tape, tape runner, light blue ink, Glossy Accents
Colours Used 
Copic Markers:
Bilby – E41, E42, E43, E44, E49
Ears – R81, R83
Stocking, background papers – R08, YR07, Y17, B32, B34, B37, C01, C00
Instructions
1. Cut a white card base 5 3/4 x 8 ½ inches. White panel 5 ½ x 4", white panel 5 ¼ x 3 ¾" and white panel 5 x 3 ½". The white panel 5 ½ x 4" using Copic YR16 around the edge. Panel 5 ¼ x 3 ¾" using Copic B37 around the edge

2. Colour your bilbies and cut them out. Ink with light blue ink the smallest white panel. Then the stars, using the stencil and texture paste. While wet, sprinkle with glitter. Then using Copic B37 colour the laser cut and then colour it over with the glitter pen. I then covered the laser cut word with  Glossy Accents to make it shine.

3. Layer all the panels and the bilbies with 3D tape. Glue down Merry Christmas and you have completed an Aussie Christmas card.

Sunday 8 December 2019

Uniquiely Creative - Warmest Greetings

Hi Everyone I am just loving the November Release for

Uniquely Creative

I have used the New Kit


take a look to see what you get in your kit in this

VIDEO
This is the Second of 4  cards I have to share with you
over the next couple of weeks.

Warmest Greetings

Card Size : 53/4'' x 4 1/4''

Colours Used :

Copic Markers

Emu's – B32, B34, B37, C01, C03, C05, C07
Beaks – E31,E33, YR12, YR68


Kit Products Used : Aussie Christmas Stamp Set



Trimmer, Copic Friendly Paper, 3D Tape, Tape Runner, Brown, Orange and Green Ink




Saturday 7 December 2019

Bellerific Friday - Winter Window


and our Theme this week is

Stamp Of The Month

 and it is

Winter Window

So it is discounted all Month long so don't miss out isn't it a
 Fabulous Stamp.

I nearly didn't make this post as my Surface Pro is on the way out
and decided there was no way was it going to connect to an
 internent hotspot are even print. It took most of the day and
IT Son to convince it. So at the 11th hour it said Ok.
So printed and coloured at high speed and inbetween lots of visitors
but had so much fun colouring it up.


Products
Lawn Fawn - Stitched Rectangles
SSS - Snowflake Border
Lawn Fawn - Snowflakes
MFT - Label Die
SSS - Moonshine Sequins
Papers - DoodlebugGingham - Linen

Copics
Curtains - RV00, RV63, RV55, RV66
Tree - YG01, YG17, YG23
Tree Trunk, Curtain Rods - E41, E43, E44
Buttons - BG02, BG05
Sky - B34, B37, B39

Don't forget to take a look
at what the rest of my team have to
inspire you with Here!

Plus don't forget the
Stamp of The Month
is
Winter Window

 There is also the colouring challenge at
on FB where you can enter the new challenge
for the Month of
and the theme is
and you just might to win some Bella Bucks.
You also should pop on over to the Blog to see all my
 Teamies Amazing  Cards and projects there this week.
Enjoy your Weekend and Happy Crafting. 


Jennifer



Wednesday 4 December 2019

Challenge Me A Christmas Card With Michelle - A Tropical Christmas


Hi I am joining 
 on her
  "Challenge Me A Christmas Card 2019"

. This is where she has Friends set
  challenges and they both take on the same challenge.
 So the one I chose is

so  pop on over to Michelle's blog and take a look at what she
has created.

I have Created A a typical Jenny Card yes there had to be a Shaker involved. 
I used one of my favorite MFT Sets of Stamps using the Adorable Penguins.

I have Used 
Copics
Penguin - B0000, B00, B95, B97, B99
Brown - E41, E43, E44, E47
Red - R32, R35, R37
Pink - RV00, RV52, RV55
Green - YG00, YG01, YG17, YG23
Orange - Y17, YR68

Dies
 - MFT Penguins In Paradise
MFT - Stitched Rectangles

Papers
Doodlebug - Fun In The Sun.

Sequins
SSS -  Assorted Moonshine


Monday 2 December 2019

The Rubber Buggy - From Us All Merry Christmas


Hi I am here for
The Rubber Buggy
 and I have used the
Oddball Snowman and the  Lawn Fawn Peekaboo Backdrop
to Create this Shaker Card Christmas Card.
I have used 3 of my favorite Oxide Inks for backgrounds 
Chipped Sapphire, Blue Print Sketch and Broken China.
I have then sprayed it using perfect pearls in a spray bottle of 
water that gives it an Awesome  Sparkle. I then did a white splatter
with watered down Copic Opaque White and a brush.
I  glued the Mountains onto the bottom of it.


I coloured my Snowman up using
Copics
Snowman - C00, C0, C01, C3
Reds - R39, R37, R35, R32
Greens - G12, G16, G19
Orange - YR12, YR15, YR68
Black - C05, C07, C09

I covered the back of the Die with a piece of Acetate and then
 used 3D foam around all the edges to create a Shaker.
I then filled one section with white beads ar little foam balls.
3D Taped the Snowman on the front and a sentiment to finish it off.


Tim Holtz Distress Oxide Ink - Fired Brick
Bazzill
bazzill card shoppe rock candy



I hope you all have a Great Crafting Week

Jennifer

Saturday 30 November 2019

Bellarific Friday - Milk And Cookies Gnome


and our Theme this week is

A Stamp From The Latest New Release



So I got to use this very Cute Gnome
and plus I turned his glass of Milk into a Shaker.

Milk And Cookies Gnome

I also used a Sentiment from

Christmas Sentiments


Don't forget to take a look
at what the rest of my team have to
inspire you with Here!

Products
Lawn Fawn - Fancy Scalloped Rectangles
Lawn Fawn - Stitched Rectangles
Sequins Catherine Pooler


Copics
Skin - E0000, E000, E00, E01, E04, E11
Beard - C00, C0, C01
Santa Hat - R24, R29, R14
Shoes, Straw - G19, G16, G12
Cookies - E31, E33, E35, E44, E47



Plus don't forget the
Stamp of The Month
is
Leo The Balancing Stuffie



 There is also the colouring challenge at
on FB where you can enter the new challenge
for the Month of
and the theme is
and you just might to win some Bella Bucks.
You also should pop on over to the Blog to see all my
 Teamies Amazing  Cards and projects there this week.
Enjoy your Weekend and Happy Crafting. 


Jennifer



Uniquely Creative - My Favorite Present



Uniquely Creative Products Used

Love You Deerly Stamps, Love You Deerly Dies, Stitched 10 Window Frame Dies, Stitching Rectangle Frame Dies, Reindeer Pals Paper Pack,  Copic Friendly Paper 
Other Products Used
Cardstock, 3D tape, tape runner
Colours Used
Copics – Deers – E30, E31, E33, E35
                Antlers – E43, E49
                Present – YG01, YG03, YG17, YG23, R32, R35, R37
Instructions
1.  Stamp and colour your images and die cut them out. I also created the
scalloped rectangle by using the Stitched Rectangle Frame and using the
 scalloped piece and red cardstock, I elongated it until it had 23 Scallops
on the side. Next I used the frame and elongated it until it fitted inside the
scallop and coloured the frame piece lime green. I then 3D layered all the
layers together.

  1. I then stamped the sentiment on white and cut a piece a fraction bigger in
white and coloured it lime green too, and then cutting a piece in red a fraction
 bigger than the green, then layered them all up.

  1. For the base I cut 9 1/2'' x 6'' in white cardstock and then cut red cardstock
    41/2'' x 5 ¾'' and patterned paper Stitched 10 Window Frame. Layer all pieces
    together using 3D tape.
       4. Layer them all together and they are complete
Related Posts Plugin for WordPress, Blogger...